|
|
Models, Platforms, and Capacities
► Denotes in-stock models. Other units are available by special order only with 3-4 month lead time.
* The given weights are approximate and may vary according to production and are based on an aluminum platform with dimensions of 63” x 98 3/8” Weight does not include cross member (66 lbs.) Types: C = Compact Models, H = Short Arm Models, HS = Long Arm Models, HL = Extra Long Arm Models
Standard Equipment – models F3CL10 to F3CL20
PLATFORM - Platform in aluminum or in sandblasted, primer-coated steel finished with two coats of two- component polyurethane varnish - Teflon wheels to prevent platform wear
MECHANICAL FUNCTIONS - Powered opening of the platform - Automatic hydraulic tilting of platform to ground - Tilt of platform in all positions - Mechanical stop of tail-lift arms against equipment (adjustable in 3 positions) – full version only - Support of pre-assembled control box on rear bumper – full version only - Tail-lift with approved rear bumper, factory-welded on the main beam of the tail-lift - Anti-friction self-lubricating bushings with lubricator and cataphoresis-treated pin
HYDRAULIC CHARACTERISTICS Power pack equipped with: - closing seal, compact and soundproof - electrical connections by means of modular extractable board - electrical board for any type of connection - 2 single-acting lifting cylinders with lubrication - 2 double-acting tilting cylinders - Cylinders protected by rubber gaiters – full version only - Built-in safety solenoid valves on every cylinder - Tank with air filter - Chrome-plated steel cylinder rods with high yield limit - Flow adjusters compensated on all downward movements
CONTROLS - External control box - Illuminated control panel - Control with no electronic components - Cut off switch with key - Two-hand use for operator’s safety - Motor with thermal safety device - Motor relay with 350 A silver pin (peak current)
CHOICE OF MOUNTING - Bolted assembly plates – full version only - Plates to be welded by the assembler – basic model only - Double adjustable plates (on demand) - Plates for bolted fastening to the semi-trailer frame (on demand)
PRODUCT FINISHING - Material conforms to EC standards - Steel cataphoresis-treated pins - Anti-friction self-lubricating bushings - Delivered fully assembled and tested, it is to be mounted to the chassis by bolting, eliminating need to repaint
Standard Equipment – model F3CL30
PLATFORM - Platform in aluminum alloy or in sandblasted steel with hexacrylic electrocataphoresis treatment. - Teflon wheels to prevent platform wear.
MECHANICAL FUNCTIONS - Powered opening of the platform. - Automatic hydraulic tilting of platform to ground. - Tilt of platform in all positions. - Mechanical stop of tail-lift arms against equipment (adjustable in 3 positions). - Support of pre-assembled control box on rear bumper. - Tail-lift with approved rear bumper, factory welded on the main beam of the tail-lift.
HYDRAULIC CHARACTERISTICS Power pack equipped with: - Closing seal, compact and soundproof. - Electrical connections by means of modular extractable board. - Electrical board for any type of connection. - 2 single-acting lifting cylinders with lubrication. - 2 double-acting tilting cylinders. - Cylinders protected by rubber gaitors. - Built-in safety solenoid valves on every cylinder. - Tank with air filter. - Chrome-plated steel cylinder rods with high yield limit. - Flow adjusters compensated on all downward movements.
CONTROLS - External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - Two-hand use for operator’s safety. - Motor with thermal safety device. - Motor relay with 350 A silver pin (peak current) - Battery cable with inline circuit protection
MOUNTING - Bolted assembly plates.
PRODUCT FINISHING - All steel parts of the hydraulic kit have been previously sandblasted, then treated with hexacrylic electrocataphoresis (except for cylinders, painted with bicomponent polyurethane enamel). - Material conforms to EC standards. - Steel cataphoresis-treated pins. - Anti-friction self-lubricating bushings. - Delivered fully assembled and tested, it is to be mounted to the chassis by bolting, eliminating need to repaint.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
