Anteo Cantilever Models

Column Tail-Lift Models

column tail lift picture

F3 CO Application –

F3 CO 05 - lifting capacity 1100 lbs - is a tail-lift specially designed for 7700 lbs vehicles.

F3 CO 10 - lifting capacity 2200 lbs - is specifically recommended for vehicles weighing more than 15,430 lbs. Light but sturdy with columns (pillars) and platform designed and made entirely in aluminum.

NB. In order to further reduce the weight of the F3 CO 05, the compartment where the hydraulic control unit is situated, is entirely made of aluminum.

Models, Platforms, and Capacities
Standard Equipment
Brochure

Models, Platforms, and Capacities

Model	Capacity (lbs.)	Bed Height	Std. Platform Size (Width x Depth)	Approx. Ship Wt. *
F3 CO 05/1	1100	41.25” to 45.50”	85” X 44.50”	286 #
F3 CO 05/2	1100	37.50” to 41.25”	79” X 48.50”	275 #
F3 CO 05/3	1100	33.50” to 37.50”	77” X 56.38”	264 #
F3 CO 10/1	2200	35.50” to 39.25”	84” X 35.5”	628 #
F3 CO 10/2	2200	39.50” to 43.25”	84” X 35.5”	628 #
F3 CO 10/3	2200	43.25” to 47.25”	87” X 41.25”	652 #
F3 CO 10/4	2200	47.25” to 51.50”	87” X 41.25”	654 #
F3 CO 10/5	2200	51.0” to 55.0”	87” X 41.25”	656 #
F3 CO 10/6	2200	51.0” to 55.0”	95” X 41.25”	672 #

* Given weights are approximate and may vary with production.

Anthony and Anteo reserve the right to make technical specification changes without notice.

Types: C = Compact Models, H = Short Arm Models, HS = Long Arm Models, HL = Extra Long Arm Models

Standard Equipment

PLATFORM

- Platform in aluminum alloy.

- The underside of the platform is protected by Nylon wear strips.

MECHANICAL FUNCTIONS

- Platform opening and closing assisted by a torsion bar.

- Double mechanical stop when the platform is in the rest position.

- Tail-lift with rear bumper (optional for F3 CO 05).

- Tail-lift with rear bumper (for F3 CO 10 as standard), as standard for F3 CO 10 for vehicles

over 26.455 lbs).

- Anti-friction self-lubricating bushings with chromium-plated pin.

HYDRAULIC CHARACTERISTICS

Power pack:

- protected, compact and soundproof;

- electrical connections with terminals.

- 1 single-acting cylinder with lubrication.

- Built-in safety solenoid valve on the cylinder.

- Tank with oil filter.

- Chromium-plated steel cylinder rods with high yield.

- Flow adjusters compensated on all downward movements.

CONTROLS

- External control box fixed to the body.

- Controls with no electronic componen

Options for F3 CO 10

- 11 3/4” deep Hinged 3 way ramp.

- Foldable platform with 11 3/4” fixed ramp.

- Trolley stop for fixed ramp.

- Non standard platform dimensions available.

- Battery restart protector.

- Fixed internal control.

- Wanderlead control with spiral cable.

- Anodized aluminum platform.

- Hook in safety gates.

- Hook in side ramps.

- Sack barrow ramps.

- Rear bumper (supplied as standard).

ts and illuminated switch buttons.

- Control circuit switch supplied on fitting kit.

- Command selection by change over switch (EN 1756-1 compliant)

- Motor with thermal safety device.

- Motor relay with silver contact.

CHOICE OF MOUNTING

- Bolt-on pillars

PRODUCT FINISHING

- Material conform to EC standards.

- Chromium-plated and zinc plated steel pins.

- Anti-friction self-lubricating bushings with lubrication points.

- Delivered assembled and tested, mounted to the vehicle

Options for F3 CO 05

- 7” deep Hinged 3 way ramp.

- Trolley stops for fixed ramp.

- Non standard platform dimensions available.

- Battery restart protector.

- Fixed internal controls.

- Wanderlead control with spiral cable.

- Anodized aluminum platform.

- Hook in safety gates.

- Hook in side ramps.

- Sack barrow ramps.

- Rear bumper

Options for F3 CO 10

- 11 3/4” deep Hinged 3 way ramp.

- Foldable platform with 11 3/4” fixed ramp.

- Trolley stop for fixed ramp.

- Non standard platform dimensions available.

- Battery restart protector.

- Fixed internal control.

- Wanderlead control with spiral cable.

- Anodized aluminum platform.

- Hook in safety gates.

- Hook in side ramps.

- Sack barrow ramps.

- Rear bumper (supplied as standard).


	[ products \| equipment specifier \| anthony updates \| manuals \| troubleshooting \| custom designs ]
	[ about us \| contact us \| what's new \| site map \| home ]

	2001 (C) Anthony Liftgates, Inc.
	Web design by Active Web Services, LLC.