|
|
* The given weights are approximate and may vary according to production, based on an aluminum platform depth of 55”.
Anthony and Anteo reserve the right to make technical specification changes without notice.
Standard Equipment PLATFORM - Platform in aluminum alloy.
MECHANICAL FUNCTIONS - Powered opening of the platform (ensures platform opening even with extreme and winter climatic conditions). - Automatic hydraulic tilting of platform to ground. - Tilt of platform in all positions. - Mechanical stop of tail-lift arms against lift frame (adjustable).
HYDRAULIC CHARACTERISTICS Power pack equipped with: - closing seal, compact and soundproof; - electrical connections by means of modular extractable board; - electrical board for any type of connection. - Power pack with simplified access through a hinged cover. - 1 single-acting lifting cylinder with lubrication. - 1 double-acting tilting cylinder. - Lifting cylinder protected by rubber gaitor. - Built-in safety solenoid valves on every cylinder. - Tank with air filter. - Chrome-plated steel cylinder rods with high yield limit. - Flow adjusters compensated on all downward movements.
CONTROLS - Super slim external fixed control box and ON - OFF cabin switch. - Illuminated control panel. - Control with no electronic components. - Two-hand use for operator’s safety. - Motor with thermal safety device. - Motor relay with 80 A silver pin (peak current). - Battery cable with inline circuit protection.
CHOICE OF MOUNTING - Bolted assembly plates. A dedicated bracket kit is available for every vehicle type. The assembly is quick, simple and does not require any modification to the vehicle frame or body, except for the fitting of the super slim control box and of the remote control with socket/plug/spiral cable. Adjustable lift height stop integrated in the lift frame to eliminate body damage.
PRODUCT FINISHING - All steel parts of the hydraulic kit have been previously sandblasted, then treated with hexacrylic electrocataphoresis (except for cylinders, painted with bicomponent polyurethane enamel). - Material conforms to EC standards. - Steel cataphoresis-treated pins. - Anti-friction self-lubricating bushings. - Delivered fully assembled and tested, it is to be mounted to the chassis by bolting, eliminating need to repaint.
Models, Platforms, and Capacities
► Denotes in-stock models. Other units are available by special order only with 3-4 month lead time.
* The given weights are approximate and may vary according to production, based on an aluminum platform width of 55”.
Anthony and Anteo reserve the right to make technical specification changes without notice. Types: C = Compact Models, H = Short Arm Models, HS = Long Arm Models, HL = Extra Long Arm Models
PLATFORM - Platform in aluminum alloy . MECHANICAL FUNCTIONS - Powered opening of the platform (ensures platform opening even with extreme and winter climatic conditions). - Automatic hydraulic tilting of platform to ground. - Tilt of platform in all positions.
HYDRAULIC CHARACTERISTICS The power pack has been designed to be fitted on the vehicle side between the front and rear axle. It is equipped with: - closing seal, and soundproof; - 2 single-acting lifting cylinders with lubrication. - 2 double-acting tilting cylinders. - Built-in safety solenoid valves on every cylinder. - Tank with air filter. - Chrome-plated steel cylinder rods with high yield limit.
CONTROLS - Super slim external fixed control box and ON - OFF cabin switch. - Illuminated control panel. - Control with no electronic components. - Two-hand use for operator’s safety. - Motor with thermal safety device. - Motor relay with 80 A silver pin (peak current). - Battery cable with inline circuit protection.
MOUNTING - Mounting brackets shaped to be fitted on vehicles with top hat section chassis. Mounting brackets to be welded to the main beam.
PRODUCT FINISHING - Material conform to EC standards. - Hard chromium-plated steel pins. - Anti-friction self-lubricating bushings. - Delivered fully assembled and tested. - Rear bumper not available.
Models, Platforms, and Capacities
► Denotes in-stock models. Other units are available by special order only with 3-4 month lead time.
* The given weights are approximate and may vary according to production, based on an aluminum platform depth of 55”.
Anthony and Anteo reserve the right to make technical specification changes without notice. Types: C = Compact Models, H = Short Arm Models, HS = Long Arm Models, HL = Extra Long Arm Models
Standard Equipment
PLATFORM - Platform in aluminum alloy.
MECHANICAL FUNCTIONS - Mechanical hydraulic tilting of platform to ground. - Tilt of platform in all positions. - Anti-friction self-lubricating bushings and chromed pins. - Platform opening with 1 single-acting tilting cylinder and spring.
HYDRAULIC CHARACTERISTICS Compact power pack equipped with: - closing seal. -1 single-acting lifting cylinder with lubrication. - 1 single-acting tilting cylinder. - Built-in safety solenoid valves on every cylinder. - Tank with air filter. - Chrome-plated steel cylinder rods with high yield limit. - Flow adjusters compensated on all downward movements.
CONTROLS - External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - Two-hand use for operator’s safety. - Motor with thermal safety device. - Motor relay with 80 A silver pin (peak current). - Battery cable with inline circuit protection.
MOUNTING With an adjustable bolted bracket and a bracket that has already been factory welded in a fixed position. Quick fitting: rear bumper already bolted in 2 parts.
PRODUCT FINISHING - Material conforms to EC standards. - Hard chromium-plated steel pins. - Anti-friction self-lubricating bushings. - Delivered fully assembled and tested, it is to be mounted to the chassis by
Models, Platforms, and Capacities
► Denotes in-stock models. Other units are available by special order only with 3-4 month lead time.
* The given weights are approximate and may vary according to production, based on an aluminum platform depth of 55”. Other platform depths available – see brochure.
Anthony and Anteo reserve the right to make technical specification changes without notice. Types: C = Compact Models, H = Short Arm Models, HS = Long Arm Models, HL = Extra Long Arm Models
PLATFORM -Platform in aluminum alloy.
MECHANICAL FUNCTIONS -Powered opening of the platform (ensures platform opening even with extreme and winter climatic conditions). - Automatic hydraulic tilting of platform to ground. - Tilt of platform in all positions. - Anti-friction self-lubricating bushings and chromed pins.
HYDRAULIC CHARACTERISTICS The power pack has been designed to be fitted on the vehicle side between the front and rear axle. It is equipped with: - closing seal, compact and soundproof; - 2 single acting lifting cylinders with lubrication. - 2 double acting tilting cylinders. - Built-in safety solenoid valves on every cylinder. - Tank with air filter. - Chrome-plated steel cylinder rods with high yield limit. - Flow adjusters compensated on all downward movements.
CONTROLS - External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - Two-hand use for operator’s safety. - Motor with thermal safety device. - Motor relay with 80 A silver pin (peak current). - Battery cable with inline circuit protection.
MOUNTING Mounting brackets shaped to be fitted on vehicles with top hat section chassis. Mounting brackets to be welded to the main beam.
PRODUCT FINISHING - Material conforms to EC standards. - Hard chromium-plated steel pins. - Anti-friction self-lubricating bushings. - Delivered fully assembled and tested.
Models, Platforms, and Capacities
► Denotes in-stock models. Other units are available by special order only with 3-4 month lead time.
* The given weights are approximate and may vary according to production, based on an aluminum platform depth of 55”. Other platform depths available – see brochure.
Anthony and Anteo reserve the right to make technical specification changes without notice. Types: C = Compact Models, H = Short Arm Models, HS = Long Arm Models, HL = Extra Long Arm Models
PLATFORM - Platform in aluminum alloy.
MECHANICAL FUNCTIONS - Mechanical hydraulic tilting of platform to ground. - Tilt of platform in all positions. - Platform opening with 1 single-acting tilting cylinder and spring.
HYDRAULIC CHARACTERISTICS Compact power pack equipped with: - closing seal. - 1 single-acting lifting cylinder with lubrication. - 1 single-acting tilting cylinder. - Built-in safety solenoid valves on every cyl. - Tank with air filter. - Chrome-plated steel cylinder rods with high yield limit. - Flow adjusters compensated on all downward movements.
CONTROLS - External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - Two-hand use for operator’s safety. - Motor with thermal safety device. - Motor relay with 80 A silver pin (peak current). - Battery cable with inline circuit protection.
CHOICE OF MOUNTING Adjustable bolted brackets. Installation is made quick and easy with individual mounting brackets for every van. F3M 075: rear-bumper bolted to the arm. F3M 10: rear-bumper in 3 pieces bolted to the main beam.
PRODUCT FINISHING - Material conforms to EC standards. - Hard chromium-plated steel pins. - Anti-friction self-lubricating bushings. - Delivered fully assembled and tested, it is to be mounted to the chassis by bolting, eliminating need to repaint.
Models, Platforms, and Capacities
► Denotes in-stock models. Other units are available by special order only with 3-4 month lead time.
* The given weights are approximate and may vary according to production, based on an aluminum platform depth of 55”. Other platform depths available – see brochure.
Anthony and Anteo reserve the right to make technical specification changes without notice. Types: C = Compact Models, H = Short Arm Models, HS = Long Arm Models, HL = Extra Long Arm Models
PLATFORM -Platform in aluminum alloy.
MECHANICAL FUNCTIONS - Platform opening by built-in springs on tilting cylinders. - 3 pieces bumper to be welded to the lift beam by the installer. - Automatic hydraulic tilting of platform to ground. - Tilt of platform in all positions.
HYDRAULIC CHARACTERISTICS Power pack equipped with: - closing seal, compact and soundproof. - 2 single-acting lifting cylinders with lubrication. - 2 single-acting tilting cylinders. - Built-in safety solenoid valves on every cylinder. - Tank with air filter. - Chrome-plated steel cylinder rods with high yield limit. - Flow adjusters compensated on all downward movements.
CONTROLS - External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - Two-hand use for operator’s safety. - Motor with thermal safety device. - Motor relay with 350 A silver pin (peak current). - Battery cable with inline circuit protection.
MOUNTING -Brackets to be welded to the main beam.
PRODUCT FINISHING - Material conforms to EC standards. - Chromium-plated steel pins. - Anti-friction self-lubricating bushings. - Delivered fully assembled and tested.
Models, Platforms, and Capacities
► Denotes in-stock models. Other units are available by special order only with 3-4 month lead time.
* The given weight is approximate and may vary according to production, based on an aluminum platform depth of 47”. Other platform depths available – see brochure. ** 3 fold special platform
Anthony and Anteo reserve the right to make technical specification changes without notice. Types: C = Compact Models, H = Short Arm Models, HS = Long Arm Models, HL = Extra Long Arm Models
PLATFORM -Platform in aluminum alloy
MECHANICAL FUNCTIONS - Tail-lift deployment by means of adjustable chromium plated guides of high yield steel. - Tail-lift deployment and stowage under chassis by means of double extension cylinder. - Automatic hydraulic tilting of platform to ground.
HYDRAULIC CHARACTERISTICS Compact power pack equipped with: - closing seal, and soundproof. - 2 single-acting lifting cylinders with lubrication. - 2 single-acting tilt cylinders with lubrication. - Memory cylinder with automatic tilting at ground level. - 1 double ram for tail-lift deployment and stowage under chassis. - Built-in safety solenoid valves on every cylinder. - Tank with air filter. - Chrome-plated steel cylinder rods with high yield. - Flow adjusters compensated on all downward movements.
CONTROLS - External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - Two-hand use for operator’s safety. - Motor with thermal safety device. - Motor relay with 350 A silver pin (peak current) - Proximity switches for automatic positioning of tail-lift. - Battery cable with inline circuit protection.
MOUNTING -Bushes to be welded to the main beam.
PRODUCT FINISHING - Material conforms to EC standards. - Chromium-plated steel pins. - Anti-friction self-lubricating bushings. - Delivered fully assembled and tested.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
